{"title":"Pentair Sand Filters","description":"","products":[{"product_id":"pentair-sand-dollar-top-mount-filter-sd80-ec-145333","title":"Pentair Sand Dollar Top Mount Filter SD80 || EC-145333","description":"\u003ch2\u003ePentair Sand Dollar SD80 Top-Mount Sand Filter | EC-145333\u003c\/h2\u003e\n\u003cp\u003eLarge-capacity 26″ diameter top-mount sand filter by Pentair (SKU EC-145333) with ~3.5 sq ft area and ~70 GPM rated flow for demanding residential pools.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne-piece thermoplastic tank built for corrosion resistance and long-term durability.\u003c\/li\u003e\n\u003cli\u003eApproximately 3.5 sq ft effective filtration area and flow rated around ~70 GPM — suited for larger pool volumes.\u003c\/li\u003e\n\u003cli\u003eTop-mounted six-position multiport valve included for filter, backwash, rinse, waste, recirculate, and closed settings.\u003c\/li\u003e\n\u003cli\u003eA combination water and sand drain simplifies servicing and winterizing operations.\u003c\/li\u003e\n\u003cli\u003eInternal tank design maintains a flat sand bed and optimizes flow, reducing channeling and extending filter runs.\u003c\/li\u003e\n\u003cli\u003eCompact footprint given capacity — ideal where space is limited but high flow is needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Pentair Sand Dollar SD80 Top-Mount Sand Filter (SKU EC-145333) is engineered for durability and high performance in large residential pool applications. Its robust one-piece thermoplastic tank resists corrosion, UV exposure, and pool chemical wear — providing a long-life filtration solution. With a large diameter 26″ tank and a designed filtration area of around 3.5 sq ft, it supports higher-flow systems in the ~70 GPM range. The included top-mounted six-position multiport valve simplifies operation and switching between filtration modes, while the combination water\/sand drain and efficient tank design reduce maintenance frequency and effort. If you need a dependable high-capacity sand filter built for durability and clarity, the SD80 delivers.\u003c\/p\u003e\n\u003ch3\u003ePro Tip\u003c\/h3\u003e\n\u003cp\u003eBefore installing, ensure your equipment pad has sufficient clearance for the 26″ tank diameter and the correct plumbing port size. Load approximately 350 lbs of standard #20 silica sand, and be sure your pump\/plumbing system does not exceed the ~70 GPM rating for optimum filter life and performance.\u003c\/p\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cp\u003eHigh‐level safety\/compatibility notes only: Shut off pump power and relieve system pressure before servicing. Confirm the filter base is level and rated for the sand load (approx 350 lbs) plus tank weight. Use the correct sand media (#20 silica unless an alternate is approved). Verify plumbing size and multiport valve port size (1½″ or 2″ as applicable) and bond\/ground per local code. Do not exceed the maximum flow rating (~70 GPM) for this model and follow the manufacturer’s instructions for backwashing and winterizing.\u003c\/p\u003e","brand":"Cavanaugh Pool, Spa \u0026 Patio, Inc.","offers":[{"title":"Default Title","offer_id":62589890625907,"sku":"PAC-05-0082","price":743.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/2464\/4211\/files\/sandfilter.jpg?v=1772563807"},{"product_id":"pentair-sand-dollar-top-mount-filter-sd60-ec-145322","title":"Pentair Sand Dollar Top Mount Filter SD60 | EC-145322","description":"\u003ch2\u003ePentair Sand Dollar SD60 Top Mount Sand Filter | EC-145322\u003c\/h2\u003e\n\u003cp\u003eCompact 22″ top-mount sand filter by Pentair (SKU EC-145322) with 2.3 sq ft area, ~60 GPM flow, one-piece tank and six-position multi-port valve.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne-piece thermoplastic tank for superior corrosion and UV resistance.\u003c\/li\u003e\n\u003cli\u003e2.3 sq ft effective filtration area with ~250 lbs of required sand – ideal for moderate systems.\u003c\/li\u003e\n\u003cli\u003eRated for up to ~60 GPM flow and ~43,200 gallon turnover in 12 hours under ideal conditions.\u003c\/li\u003e\n\u003cli\u003eTop-mounted six-position multi-port valve simplifies system operation (filter\/backwash\/rinse\/waste\/recirculate\/closed).\u003c\/li\u003e\n\u003cli\u003eA combination water and sand drain port is included for easier service and winterizing.\u003c\/li\u003e\n\u003cli\u003e~22″ diameter footprint fits smaller equipment pads without sacrificing performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Pentair Sand Dollar SD60 Top Mount Sand Filter (SKU EC-145322) is built to deliver robust, long-lasting performance in residential pool applications. Its one-piece thermoplastic tank is engineered to resist corrosion, UV abrasion, and chemical damage, providing a durable foundation for your pool’s filtration system. With a 2.3 sq ft effective filter area and approximately 60 GPM flow capacity, this model handles moderate-sized pools while maintaining efficient turnover. The top-mounted multi-port valve puts full control within reach, and the internal design ensures even sand bed distribution to reduce channeling and extend service intervals. A combination drain port simplifies maintenance and winterizing tasks. If you’re looking for a reliable, compact sand filter without sacrificing quality, the SD60 is a strong choice.\u003c\/p\u003e\n\u003ch3\u003ePro Tip\u003c\/h3\u003e\n\u003cp\u003eVerify your equipment pad has sufficient clearance for the ~22½″ diameter tank and allow room above the valve for operation and servicing. Use exactly ~250 lbs of #20 silica sand (or equivalent media) and select a pump that maintains system flow below the filter’s 60 GPM rating to maximize lifespan and performance. When replacing a larger filter, check that all plumbing leads into the valve port size and ensure proper base leveling and bonding per local code.\u003c\/p\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cp\u003eHigh-level safety\/compatibility notes only: Shut off pump power and relieve system pressure before servicing or installing. Ensure the base is level and rated for the tank plus media load. Load the correct media (≈ 250 lbs of #20 silica sand) and verify plumbing size and valve clearance. Bond and ground the filter system per local code. Do not exceed the specified maximum flow (~60 GPM). Follow the manufacturer’s backwash and winterizing instructions.\u003c\/p\u003e","brand":"Cavanaugh Pool, Spa \u0026 Patio, Inc.","offers":[{"title":"Default Title","offer_id":62589890658675,"sku":"PAC-05-0081","price":668.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/2464\/4211\/files\/SandDollar_27de2f90-a84e-4979-a015-226a37696396.png?v=1772563809"},{"product_id":"pentair-sand-dollar-top-mount-filter-sd40-ec-145320","title":"Pentair Sand Dollar Top Mount Filter SD40 | EC-145320","description":"\u003ch2\u003ePentair Sand Dollar SD40 Top Mount Sand Filter | EC-145320\u003c\/h2\u003e\n\u003cp\u003eCompact top-mount sand filter by Pentair, featuring 1.8 sq ft area, 150 lbs sand capacity, ~40 GPM flow — optimized for medium residential pools.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1.8 sq ft effective filtration area in a 19″ diameter tank — fits tighter equipment pads.\u003c\/li\u003e\n\u003cli\u003e150 lbs of #20 silica sand required — lower media cost and easier handling.\u003c\/li\u003e\n\u003cli\u003eRated flow around 40 GPM; turnover of ~19,200 gallons in 8 hours under ideal conditions. \u003c\/li\u003e\n\u003cli\u003eOne-piece thermoplastic tank delivers corrosion and UV resistance for long service life.\u003c\/li\u003e\n\u003cli\u003eTop-mounted six-position multiport valve for filter\/backwash\/rinse\/waste\/recirculate\/closed — simplified operation. \u003c\/li\u003e\n\u003cli\u003eA combination of sand and water drainage makes winterizing and servicing faster. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Pentair Sand Dollar SD40 Top Mount Sand Filter (SKU EC-145320) offers a durable, high-quality solution for residential pool filtration when footprint or budget is a consideration. With a compact 19″ diameter tank and an effective filtration area of 1.8 sq ft, this model manages efficient turnover while requiring only 150 lbs of sand. Constructed with a one-piece thermoplastic tank for superior chemical and environmental resistance, it encapsulates a specially designed internal lateral system to maintain a flat sand bed and promote consistent flow and clarity. The top-mounted multiport valve centralizes operation and simplifies switching between key modes, while the combined drain further eases maintenance. Choose the SD40 when you need reliable performance in a smaller form factor without compromising on longevity.\u003c\/p\u003e\n\u003ch3\u003ePro Tip\u003c\/h3\u003e\n\u003cp\u003eKeep your pump’s flow rate under the ~40 GPM design rating to extend media life and backwash intervals. Confirm you have around 37″ of clearance above the filter for the valve and servicing. Load exactly 150 lbs of #20 silica sand for optimal performance and follow Pentair’s instructions for backwashing and winterizing.\u003c\/p\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cp\u003eHigh-level safety\/compatibility notes only: Before installing, shut off the filtration system power. Ensure the base is level and rated for the filter tank plus sand weight. Use #20 silica sand and load exactly 150 lbs per the manufacturer's instructions. Verify the multiport valve port size matches your plumbing (typically 1½″), and bond the metal components as required by local code. Do not exceed 50 psi operating pressure and follow Pentair’s manual for winterizing and servicing.\u003c\/p\u003e","brand":"Cavanaugh Pool, Spa \u0026 Patio, Inc.","offers":[{"title":"Default Title","offer_id":62589890724211,"sku":"PAC-05-0080","price":829.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/2464\/4211\/files\/SandDollar_51445ee0-145d-46d3-ba10-940ca00c2c19.png?v=1772563810"},{"product_id":"pentair-tagelus-top-mount-filter-with-multiport-valve-ta60d-ec-145241","title":"Pentair Tagelus Top Mount Filter with Multiport Valve (TA60D) | EC-145241","description":"\u003ch2\u003ePentair Tagelus TA60D Top Mount Sand Filter w\/ Multiport Valve | EC-145241\u003c\/h2\u003e\n\u003cp\u003eFiberglass-reinforced 24.5″ diameter top-mount sand filter by Pentair (SKU EC-145241), featuring ~3.1 sq ft filter area, ~60 GPM capacity, and a six-position multiport valve included.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne-piece fiberglass-reinforced tank built for corrosion and UV resistance.\u003c\/li\u003e\n\u003cli\u003e24.5″ diameter tank with ~3.1 sq ft effective filtration area for medium-sized residential pools.\u003c\/li\u003e\n\u003cli\u003eTop-mounted six-position multiport valve simplifies filter\/backwash\/rinse\/waste\/recirculate\/closed operations.\u003c\/li\u003e\n\u003cli\u003eRequires approximately 325 lbs of standard #20 silica sand, optimizing runtime and service intervals.\u003c\/li\u003e\n\u003cli\u003eRated for up to 50 psi continuous pressure and up to 104 °F (40 °C) water temperature for dependable performance.\u003c\/li\u003e\n\u003cli\u003eInternal diffuser and threaded internals maintain a flat sand bed and reduce channeling to extend filter cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Pentair Tagelus TA60D Top Mount Sand Filter (SKU EC-145241) offers a durable, high-performance foundation for in-ground pool filtration. With its one-piece fiberglass tank, it delivers superior durability in demanding pool environments. The 24.5″ diameter design accommodates a substantial sand load while keeping the footprint reasonable. The top-mounted multiport valve adds convenience and ease of operation. Internal engineering, such as the diffuser and threaded components, ensures efficient flow, extended run times, and easier servicing. Put simply, this filter provides a durable, dependable answer when clarity and longevity matter.\u003c\/p\u003e\n\u003ch3\u003ePro Tip\u003c\/h3\u003e\n\u003cp\u003eEnsure your equipment pad has enough clearance for the tank and valve, and that the base is level and structurally sound. Load the correct amount (~325 lbs) of #20 silica sand and keep system flow below the filter’s design flow rate for optimum performance and longevity.\u003c\/p\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cp\u003eHigh-level safety\/compatibility notes only: Turn off the pump and relieve system pressure before servicing or installing. Confirm the base is level and can support the tank with sand. Use the correct sand volume (325 lbs) and verify plumbing size and valve clearance. Bond and ground filter system, if required by code. Do not exceed 50 psi or 104 °F water temp.\u003c\/p\u003e","brand":"Cavanaugh Pool, Spa \u0026 Patio, Inc.","offers":[{"title":"Default Title","offer_id":62589890789747,"sku":"PAC-05-0079","price":876.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/2464\/4211\/files\/Tagelus.png?v=1772563811"},{"product_id":"pentair-tagelus-top-mount-filter-with-multiport-valve-ta100d-ec-145240","title":"Pentair Tagelus Top Mount Filter With Multiport Valve (TA100D) | EC-145240","description":"\u003ch2\u003ePentair Tagelus TA100D Top Mount Sand Filter w\/ Multiport Valve | EC-145240\u003c\/h2\u003e\n\u003cp\u003eHigh-capacity one-piece fiberglass sand filter from Pentair (SKU EC-145240), featuring 4.9 sq ft filter area and a top-mounted multiport valve for efficient, long-life performance.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne-piece fiberglass-reinforced tank built for strength, corrosion resistance, and UV durability.\u003c\/li\u003e\n\u003cli\u003e4.9 sq ft effective filter area and ~100 GPM rated flow — ideal for larger residential pools.\u003c\/li\u003e\n\u003cli\u003eTop-mounted six-position multiport valve simplifies plumbing, operation, and maintenance.\u003c\/li\u003e\n\u003cli\u003eA combination of sand and water drainage enables faster servicing and winterizing.\u003c\/li\u003e\n\u003cli\u003eThreaded internals and 360° diffuser design ensure a level sand bed, reduce channeling, and extend time between backwashes.\u003c\/li\u003e\n\u003cli\u003eRequires approximately 600 lbs of standard #20 silica sand for full filtration capacity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Pentair Tagelus TA100D Top Mount Sand Filter (SKU EC-145240) is engineered for long-term dependable service in in-ground pool applications. With its one-piece fiberglass-reinforced tank, the unit delivers exceptional durability against corrosion, UV exposure, and pool chemical wear. Its generous filter area and high flow capability make it a strong choice for larger systems, while the top-mounted multiport valve and internal design features help simplify operations and maintenance. Whether you’re installing new or upgrading your existing system, the Tagelus TA100D brings a durable, high-performance foundation for clean, clear pool water.\u003c\/p\u003e\n\u003ch3\u003ePro Tip\u003c\/h3\u003e\n\u003cp\u003eBefore installation, verify you have adequate vertical clearance (~65″) and a solid level base for the large-diameter tank. Load with ~600 lbs of #20 silica sand and select a pump\/plumbing layout that keeps system flow beneath the 100 GPM rating to optimize filter lifespan and performance.\u003c\/p\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cp\u003eHigh-level safety\/compatibility notes only: Shut off pump power and relieve system pressure before servicing or installing. Verify the filter base is level and rated for the large-diameter tank. Load the correct sand volume as per the manufacturer's instructions. Bond\/ground filter system if required by local code. Do not exceed the maximum continuous operating pressure of 50 psi and the maximum water temperature of 104 °F (40 °C).\u003c\/p\u003e","brand":"Cavanaugh Pool, Spa \u0026 Patio, Inc.","offers":[{"title":"Default Title","offer_id":62589890822515,"sku":"PAC-05-0078","price":1609.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/2464\/4211\/files\/Tagelus_615eac32-4f81-4417-84b0-398bea81745d.png?v=1772563813"},{"product_id":"pentair-triton-ii-side-mount-filter-no-valve-tr60-ec-140264","title":"Pentair Triton II Side Mount Filter (No Valve) TR60 | EC-140264","description":"\u003ch2\u003ePentair Triton II TR60 Side Mount Sand Filter (No Valve) | EC-140264\u003c\/h2\u003e\n\u003cp\u003eDurable 24″ diameter side-mount sand filter by Pentair with fiberglass-reinforced tank and valve sold separately.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne-piece fiberglass-reinforced tank built via GlasLok™ for UV and corrosion resistance.\u003c\/li\u003e\n\u003cli\u003e3.14 sq ft filtration area supports flow rates around 63 GPM — suitable for medium residential pools.\u003c\/li\u003e\n\u003cli\u003eSide-mount configuration lets you choose and install your own valve (multi-port or push-pull).\u003c\/li\u003e\n\u003cli\u003eHeavy-duty closure with built-in pressure gauge and manual air relief valve simplifies inspection and service.\u003c\/li\u003e\n\u003cli\u003eSwing-away diffuser and threaded internal parts allow fast maintenance and ease of part replacement.\u003c\/li\u003e\n\u003cli\u003eRated for continuous operation at up to 50 psi and water temperatures up to 104 °F (40 °C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Pentair Triton II TR60 Side Mount Sand Filter (SKU EC-140264) is engineered for long-life service and dependable filtration in in-ground pool settings. Its 24″ diameter fiberglass-reinforced tank employs Pentair’s GlasLok™ manufacturing process, delivering outstanding resistance to corrosion and weathering. With a filtration area of 3.14 sq ft and side-mount valve compatibility, it supports flows in the neighborhood of 63 GPM while giving you flexibility on valve choice. The robust lid design, pressure gauge, air relief valve, swing-away diffuser, and threaded internals make service and maintenance straightforward. Rated for up to 50 psi and 104 °F, this filter provides a solid foundation for efficient, low-maintenance pool water clarity.\u003c\/p\u003e\n\u003ch3\u003ePro Tip\u003c\/h3\u003e\n\u003cp\u003eEnsure you have proper vertical clearance and sand capacity (approximately 325 lbs of #20 silica sand) before installation. Choose a compatible 2″ side-mount valve (multi-port or push-pull) that matches the tank’s flow rating and your plumbing layout.\u003ca href=\"https:\/\/www.epoolsupply.com\/products\/copy-of-pentair-triton-ii-side-mount-filter-no-valve-tr100-1-029-00-ec-140210?variant=39560059387989\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cp\u003eHigh-level safety\/compatibility notes only: Turn off pump power and relieve system pressure before servicing. Confirm the filter base is level and plumbing clearances accommodate the 24″ diameter tank. Load the correct amount of sand (#20 silica) per Pentair specifications. Bond and ground the filter system if required by local code. Do not exceed the maximum operating pressure of 50 psi and ensure water temperature does not exceed 104 °F.\u003c\/p\u003e","brand":"Cavanaugh Pool, Spa \u0026 Patio, Inc.","offers":[{"title":"Default Title","offer_id":62589890855283,"sku":"PAC-05-0077","price":1292.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/2464\/4211\/files\/TritonII.png?v=1772563814"},{"product_id":"pentair-triton-ii-side-mount-filter-no-valve-tr100-ec-140210","title":"Pentair Triton II Side Mount Filter (No Valve) TR100 | EC-140210","description":"\u003ch2\u003ePentair Triton II TR100 Side Mount Sand Filter (No Valve) | EC-140210\u003c\/h2\u003e\n\u003cp\u003eDurable fiberglass-reinforced 30″ side-mount sand filter from Pentair — 4.91 sq ft area, designed for large in-ground pools (valve sold separately).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne-piece fiberglass-reinforced tank built via GlasLok™ for UV and corrosion resistance.\u003c\/li\u003e\n\u003cli\u003e4.91 sq ft filtration area and 30″ diameter tank supports up to 600 lbs #20 silica sand.\u003c\/li\u003e\n\u003cli\u003eSide-mount configuration allows flexible valve placement; valve not included.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty closure with built-in pressure gauge and manual air-relief valve simplifies servicing.\u003c\/li\u003e\n\u003cli\u003eMaximum continuous operating pressure of 50 psi and water temperature up to 104 °F (40 °C).\u003c\/li\u003e\n\u003cli\u003eThreaded internal components enable easier maintenance and part replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Pentair Triton II TR100 Side Mount Sand Filter (SKU EC-140210) is engineered to deliver years of dependable filtration in residential in-ground pools. Its one-piece fiberglass-reinforced tank offers outstanding durability and longevity. With a spacious tank and filter area, the unit is ideal for larger systems or high-flow setups. The side-mount design allows your choice of compatible valve (sold separately), while features such as the heavy-duty closure, built-in gauge, and air-relief make inspection and maintenance fast and efficient. Whether installing new or upgrading your system, this filter offers a strong foundation for consistent pool water clarity.\u003c\/p\u003e\n\u003ch3\u003ePro Tip\u003c\/h3\u003e\n\u003cp\u003eSince the valve is sold separately, be sure to select a compatible 2″ multiport or push-pull valve rated for the TR100’s flow. Also verify the required sand volume (about 600 lbs) and tank clearance (approx 42″ vertical) before install to ensure proper fit and performance.\u003c\/p\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cp\u003eHigh-level safety\/compatibility notes only: Shut off the pump and electrical power before servicing. Verify your plumbing size, clearance, and structural support for a 30″ tank. Use correct volume of #20 silica sand and ensure the filter is level and properly bonded\/grounded if required. Follow manufacturer’s instructions for backwash, sand replacement every 5-7 years, and winterizing procedures.\u003c\/p\u003e","brand":"Cavanaugh Pool, Spa \u0026 Patio, Inc.","offers":[{"title":"Default Title","offer_id":62589890888051,"sku":"PAC-05-0076","price":1661.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/2464\/4211\/files\/TritonII_ab5c4233-63e9-4989-90e9-9595db380975.png?v=1772563814"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/2464\/4211\/collections\/ChatGPT_Image_Dec_2_2025_02_18_07_PM.webp?v=1772640476","url":"https:\/\/cavanaughpool.com\/collections\/pentair-sand-filters.oembed","provider":"Cavanaugh Pool, Spa \u0026 Patio, Inc.","version":"1.0","type":"link"}